Ideal In-Sure® Push-In Wire Connectors
Unique push-in design
No crimping, twisting or turning to install.
Fast and Easy Installation
Just strip the wire (3/8-1/2 length) and push into the connector.
Requires little force and effort to install, reducing downtime.
No-twist insertion
Helps eliminate failure due to repetitive motion fatigue.
Versatile
Connects both stranded and solid copper wire.
Wide wire range
Accepts 20-12 AWG solid wire and 16-12 AWG stranded wire.
Clear polycarbonate housing
Allows quick visual inspection of the connection for maximum reliability.
Individual wire compartments
Holds each wire individually for a strong connection.
Ground rating
Eliminates the need for a special ground connector.
UL Listed and CSA Certified
UL listed connectors fully insulate wires to ensure safe operations.
Specifications
Rated for 600V (1000V for fixtures and signs)
RoHS Compliant
Temperature Rating: 221°F
UL Designation: 486C
Maximum Amperage: 20A
Installation instructions
1. Wiring must comply with all applicable electrical codes.
2. Turn OFF power before removing or installing connectors.
3. Strip wires 1/2". Completely bare conductors.
4. Grip wire firmly and push conductor into open port. Use only one conductor per port.
5. Verify conductor is fully inserted to the back of the connector.
6. Connector is reusable on solid wires of the same wire gage or larger. If reusing connector, cut and re-strip conductors.
7. In order to remove a wire, pull and twist the wire back and forth.